Copyright (C) 1986-2008 by Daniel H. Hudgins, All Rights Reserved.

No part of "This Web Site" (HTML document), including associated files, may be: distributed, sublicensed, transmitted, copied, archived, mirrored, modified, bundled, embedded, sold, given away, rented, loaned, or shared in any form without express written permission in a formal Vendor agreement contract dated and signed in ink obtained directly from Daniel H. Hudgins by registered postal mail. All agreements for permission to distribute expire after a period no greater than one year from the date of the signing of the agreement by Daniel H. Hudgins. See the current "EULA" for information regarding limited copying and storage for the purpose of "Beta Testing" "This Web Site."

To view or use the current version of this Web page you may need to reload or refresh the display of this page by your browser. Just clicking on the browser's [Reload] or [Refresh] icon may not be enough to insure that all of the page's most current contents have been cached and displayed. Some browsers may have additional commands to help display the page's most current contents such as: holding down the [Shift] key and clicking on the [Reload] icon, holding down the [Control] key and clicking on the [Refresh] icon, holding down the [Control] and [Shift] keys and clicking on the [Refresh] icon, pressing the [Control] and [F5] keys, pressing [Control] and the [R] key, or some other combination of keys or clicks. Check to see which commands your HTML browser uses to load the most current page contents into its cache and then to display them onto the screen.

This Web site is dedicated to the thousands of "users" of my programs, those who have helped test my programs over the last 22 or so years, and especially those who shared their experiences with me.

You must read this notice: This is a licensed Web site (HTML document and associated files). You must read and agree to be legally bound in contract by the Terms of Use and conditions given in the End User License Agreement ("EULA"), Legal Notices, Instructions, Warnings, Disclaimers, and all other text in "SECTION: 0" of "This Web Site" (HTML document and associated files) before reading or using any of the information, software programs, and or files, contained in, linked to, and or associated with, "This Web Site" (HTML document and associated files). Any use or "Beta Testing" of "This Web Site" constitutes your acknowledgment of your full agreement with the current End User License Agreement ("EULA") and your decision to have this current license supersede all prior and contemporaneous agreements and understandings. Information and files in "This Web Site" (HTML document and associated files) have been placed here so that long time users of "The Author's" programs DANCAD3D.COM (tm) , DANCAM.EXE (tm) , or DANPLOT.EXE (tm) could help proofread the text of the documentation files or screens displayed, and also help test data files, example files, and or any software programs that might be made available from time to time, to aid "The Author" in finding mistakes, bugs, and other errors, omissions, defects, mistakes, and faults. Everything in "This Web Site" (HTML document and associated files) is "Beta Test", "Beta Code", Experimental, Preliminary, requires proofreading, or is being evaluated for possible revision, and is NOT warranted to be free of defect. To help "The Author" report any bugs, foul-ups, defects, or mistakes that you find, see "SECTION: 8" for instructions. "This Web Site" (HTML document and associated files) and all other files and programs by Daniel H. Hudgins are made available "AS IS" without warranty of any kind express, expressed, or implied. All offers and specifications are subject to change or discontinuation without notice of any kind. Please read "SECTION: 8" of "This Web Site" (HTML document and associated files) before trying to contact "The Author."

Please read all of the instructions in this HTML documentation (Web site), and also read the circuit's parts manufacture's specifications sheets, data sheets, and technical literature before trying to build the BIPOLAR2 circuit board. You will have to get the part's manufactures information directly from the manufacture or from the manufacture's published works. The BIPOLAR2 board was only designed for use in the testing of DANCAM.EXE (tm) and DANPLOT.EXE (tm) and is not intended, and is not recommend, to be used with other programs, or to be sold as a product, or to be sold or given away as part of some product.

You may not distribute, sell, rent, share, or give away these HTML documentation files or printed copies of them. You may not extract text from these HTML documentation files for distribution, sale, rent, sharing, or giving away. You can use the [Print] option in your browser to make one copy for yourself to mark up in order to help me proofread the text for mistakes.

Documents may be available to download from time to time, you can check SECTION: 9 to see what the current situation with regard to downloadable files is. The names of these documentation files may change, and they may be edited, combined, or eliminated in the future, without notice.

You may need to adjust your browser for best viewing of the pre- formatted text by changing the "font" size using the commands in your browser (see the help in your browser, or use the pull-down menus in your HTML browser.) If some letters in words on the screen appear to be missing or scrambled try changing the font size in your browser as this sometimes happens even though the words are spelled correctly in the HTML code.

Use the "Edit, Find in page Ctrl+F" or "Edit, Find (in this page)... Ctrl+F" command in your browser to search for keywords within the documentation text in this HTML page. You will need to search over again in the other pages in this HTML document for the same keyword since your browser may not search for a keyword beyond the current page that is loaded.

The BIPOLAR2 board needs to be put inside of a metal box so that the fire risk is reduced, and so that the RFI/EMI is shielded. Be sure that you adjust the supply voltage to match the load, so that you do not exceed the SOA of the transistors, traces, and other components, on the board.

Before you etch the board go between the traces and scratch off any toner that has smudged, so that the gap between the traces is wide enough to prevent short circuits, or arcing. Also you may need to use a etch resist marking pen to touch up any breaks in the traces before etching to prevent open traces.

Be sure that the metal box you put the BIPOLAR2 boards in has good air flow over the heat sinks, particularly with motors that draw more current, since the transistors, and other circuit parts, need to be kept at a safe temperature.